platform handrailing height requirements

10/28/2004 - Top rail and handrail requirements for stairrail systems Oct 28, 2004 Under these provisions, while construction work is being performed, a separate handrail must be provided if the top rail of a stairway system exceeds 37 inches. Since the top rail you refer to is 42 inches, a separate stair rail would be required. The different height requirements reflect different purposes.

Plain Text OSHA standards for guarding openings and holes use the following de?nitions: Floor hole. top rail to floor, platform, runway, or ramp level. Nominal height of mid rail is 21 inches. A "standard toeboard” is 4 inches nominal in vertical height, with not handrail shall be provided on each enclosed side and one stair rail on.

Five Key OSHA Standards for Work Platforms - Spika Blog May 30, 2017 The top edge height may exceed 45 inches (114 cm), provided the guardrail system meets all other criteria. Spika Work Platform Mars Series. This may be the quintessential OSHA requirement for work platforms. Any work area four feet or more above the next level lower MUST have guardrails. Period.

Compliance of stair and platform railings with height requirements in August 27, 2008. Mr. Bryan Cobb 500 Industrial Drive, NE White, GA 30184. Dear Mr. Cobb: Thank you for your January 23, 2008, fax to the Occupational Safety and Health Administration's (OSHA's) Directorate of Enforcement Programs (DEP). You had specific questions regarding the OSHA standards for fixed industrial

PDS #075 - County of San Diego Guards are required at the following locations per Section 1015 the 2016 California Building Code: ? Along open-sided walking surfaces, mezzanines, industrial equipment platforms, stairways, ramps and landings that serves as a handrail shall have a height not less than 34 inches and not more than 38 inches measured.

OSHA Requirements for Guardrail and Safety Railing Compliance Feb 1, 2017 OSHA 1910.29(b) contains system requirements that employers must follow to ensure guardrail systems will protect workers from falling to lower levels: 1910.29(b)(1) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the

Know Your Railings, Toeboards and Handrails 1 July 15, 2016 Jul 15, 2016 The basic requirements for railings, including handrails, and toeboards used for guarding floor and wall openings Further requirements address railings constructed of wood, pipe or structural steel: o A smooth-surfaced top rail at a height above floor, platform, runway, or ramp level of 42 inches nominal;.

What is the Appropriate Height for Fall Protection Railing? - Fall In the event that workers are utilizing stilts in an area protected by guardrails, the 42” requirement must be extended to match the height of the stilts. In other words, if the workers are on stilts that are 2' (24”) high, then the top rail of your guardrail system must be at 66” (this will also affect the height of your mid-rail which is

Know the Requirements for General Industry -- Occupational Health Sep 1, 2012 Under 1910.23(e)(1), OSHA says that a guardrail must have a vertical height of 42 inches nominal from the upper surface of the top rail to floor, platform, runway, or ramp level. "Nominal" simply means that 42 inches has been established as the de facto standard for guardrail height. OSHA allows for

What is the maximum height for a terrace without a guard rail? Apr 6, 2016 The 2012 International Building Code (IBC 2012) generally requires guardrails when the difference in elevation between the upper and lower surfaces is 30 inches or greater. 1013.2 Where required. Guards shall be located along open-sided walking surfaces, including mezzanines, equipment platforms,

Product Details

Product List